Arduino first steps: Unterschied zwischen den Versionen

Aus www.wiki.ardumower.de
Wechseln zu: Navigation, Suche
Zeile 3: Zeile 3:
 
<h3>
 
<h3>
  
<b>1. Attach the Arduino to your computer</b>
+
<b>1. Attach the Arduino to your computer</b>
 
  Using an USB cable, attach the Arduino (Arduino Nano or Arduino Mega) to your computer as shown below.
 
  Using an USB cable, attach the Arduino (Arduino Nano or Arduino Mega) to your computer as shown below.
 
  <gallery>
 
  <gallery>

Version vom 24. November 2014, 11:33 Uhr

This page describes how to start with your Arduino that you can purchase via the shop Shopping.png.

1. Attach the Arduino to your computer Using an USB cable, attach the Arduino (Arduino Nano or Arduino Mega) to your computer as shown below.

2. Download

Click here to download the Arduino development software to your computer (Windows users should download the 'Installer' version on that page):
Arduino symbol small.jpg  

3. Install

After the download completed, install the Arduino development software on your computer:
For Windows, double click the file 'arduino-1.5.8-windows.exe' in your Windows file explorer.

4. Run

After the installation completed, run the Arduino development software on your computer 
by double clicking the 'Arduino' symbol on your Windows desktop.
Arduino start symbol small.jpg

5. Choose blink example

Via the menu, click on 'File->Examples->Basics->Blink'. This will load the Arduino blink example.
Arduino ide blink example.jpg

6. Choose correct board type

Via the menu, click on 'Tools->Board->Arduino Nano' to choose your Nano board (or Arduino Mega 2560 if you want to use a Mega board). 
Arduino ide choose board.jpg

7. Choose correct USB serial port

Via the menu, click on 'Tools->Port', and choose the detected USB serial port.
Arduino ide choose port.jpg

8. Upload the blink example

Click on the 'Upload' symbol to upload the blink example to your Arduino. After the upload completed, your Arduino will start to blink!
Arduino ide upload.jpg
Congratulations! You have just programmed your first Arduino!