Ardumower Chassis 'mountain mod': Unterschied zwischen den Versionen

Aus www.wiki.ardumower.de
Wechseln zu: Navigation, Suche
(Abstract)
(Needed parts)
(24 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
 
=Abstract=
 
=Abstract=
This page describes how to modify the Ardumower Chassis to run up higher slopes with it (tested up to 45 percent). This works by  
+
This page describes how to modify the Ardumower Chassis to run up higher slopes with it (tested up to 30 percent). This works by  
 
#turning the front drive into a rear drive and so requires to reverse the drive direction (so front is back and back is front)
 
#turning the front drive into a rear drive and so requires to reverse the drive direction (so front is back and back is front)
 
#modifying the tire profile (give it more grip)
 
#modifying the tire profile (give it more grip)
 +
##Modify tire profile OR
 +
##Off-road version (sand etc.): A bicycle tube is added around the tire
  
 
<gallery>
 
<gallery>
File: Ardumower_slope.png
+
File: Ardumower_slope.png | difference front/rear wheel
 +
File: Ardumower_environment_slope.jpg | environment with slope
 
</gallery>
 
</gallery>
  
 
=Needed parts=
 
=Needed parts=
 
*cup
 
*cup
*acrylic glas sheet
+
*acrylic glas sheet (1mm)
 
*rubber band
 
*rubber band
  
Zeile 19: Zeile 22:
 
# disable ultrasonic sensor
 
# disable ultrasonic sensor
 
# move perimeter coil from old front to old back side
 
# move perimeter coil from old front to old back side
 
=Pictures=
 
  
 
<gallery>
 
<gallery>
 
File: Ardumower_reverse.jpg | Step 1: reverse the direction (front and back), add cup
 
File: Ardumower_reverse.jpg | Step 1: reverse the direction (front and back), add cup
File: Ardumower_mountains_top.jpg| Perimeter coil at old back side
+
File: Ardumower_rear_driven_experimental.jpg | Alternative: reverse the direction (front and back)
File: Ardumower_mountains_side.jpg|
+
File: Ardumower_mountains3.jpg| Step 2: Add acrylic glass sheet (1mm)
File: Ardumower_mountains3.jpg| Step 2: Add acrylic glass sheet
+
 
File: Ardumower_mountains5.jpg| Step 3: Add rubber band
 
File: Ardumower_mountains5.jpg| Step 3: Add rubber band
 
File: Ardumower_mountains2.jpg| Step 4: Modify charging station
 
File: Ardumower_mountains2.jpg| Step 4: Modify charging station
File: Ardumower_mountain_tires.jpg| Step 5: Modify tire profile
+
File: Ardumower_mountain_tires.jpg| Step 5a: Modify tire profile
File: Ardumower_mountain_tires_profile.jpg
+
File: Ardumower_tire_rubber.jpg | Step 5b: 'Off-road' tire mod using rubber
 +
</gallery>
 +
 
 +
=Pictures=
 +
 
 +
<gallery>
 +
File: Ardumower_mountains_side.jpg| Inside (prototype)
 +
File: Ardumower_mountain_tires_profile.jpg | modified tire profile
 +
File: Ardumower_mountains_inside.jpg | Inside (PCB)
 +
File: Ardumower_tire_mod_off_road1.jpg | 'Off-road' tire mod using bicycle tube
 +
File: Ardumower_electronics_box.jpg | Electronics box
 +
File: Bumperduino_example.jpg | BumperDuino
 
</gallery>
 
</gallery>
  
Zeile 37: Zeile 48:
 
#[https://www.youtube.com/watch?v=Z8RBlNjtH9M&feature=youtu.be Demo]
 
#[https://www.youtube.com/watch?v=Z8RBlNjtH9M&feature=youtu.be Demo]
 
#[http://youtu.be/3-UoYhjYH2w Optimized tires]
 
#[http://youtu.be/3-UoYhjYH2w Optimized tires]
 +
#[https://www.youtube.com/watch?v=Pgj6wwDrps4 Bicycle tube tires for 'off-road']
 +
#[https://www.youtube.com/watch?v=hWDpaL9D9GQ&feature=youtu.be Ardumower rear/front driven climbing difference]
 +
 +
=Other ideas=
 +
<gallery>
 +
  File: Ardumower_rear_driven_0_99.jpg | rear driven (idea)
 +
  File: Ardumower_rear_driven_experimental.jpg | rear driven (experimental)
 +
</gallery>

Version vom 10. Mai 2018, 12:24 Uhr

Abstract

This page describes how to modify the Ardumower Chassis to run up higher slopes with it (tested up to 30 percent). This works by

  1. turning the front drive into a rear drive and so requires to reverse the drive direction (so front is back and back is front)
  2. modifying the tire profile (give it more grip)
    1. Modify tire profile OR
    2. Off-road version (sand etc.): A bicycle tube is added around the tire

Needed parts

  • cup
  • acrylic glas sheet (1mm)
  • rubber band

Turning front drive into rear drive

  1. swap motor cables (right and left)
  2. swap odometry cables (right and left)
  3. swap battery charging pin cables (right and left)
  4. disable ultrasonic sensor
  5. move perimeter coil from old front to old back side

Pictures

Videos

  1. Demo
  2. Optimized tires
  3. Bicycle tube tires for 'off-road'
  4. Ardumower rear/front driven climbing difference

Other ideas