Model R/C

Abstract

The Ardumower can be controlled via a model R/C. For remote controlling your robot mower you'll need:

• a model remote control (e.g. 2.4 Ghz)
• a suitable model remote receiver (4 channels or more)

• 
• 

Wiring

The channel assignment is:

 left stick (left/right):  pinRemoteSwitch
 left stick (up/down):     pinRemoteMow
 right stick (left/right): pinRemoteSteer
 right stick (up/down):    pinRemoteSpeed

PCB1.3

For PCB1.3 and Azurit 1.08 it is as following:

Maybe first you have to activate "useRemote = 1" in mower.cpp.

Connector	Signal
Pin1	+5V
Pin2	GND
Pin3	Signal Mow
Pin4	Signal Steer
Pin5	Signal Speed
Pin6	Signal Switch

The Mower can be started in R/C-Mode by holding the Powerbutton to start mowing until the third beep.

Videos

1. demo