PCB 1.3 (English): Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
(→Schematics, Drawings) |
|||
| Zeile 1: | Zeile 1: | ||
This page describes how to assemble PCB 1.3, how to add modules and how to configure the PCB. | This page describes how to assemble PCB 1.3, how to add modules and how to configure the PCB. | ||
| + | [Pcb1_3.jpg] | ||
<b>NOTE: WE ARE CURRENTLY WORKING ON THIS PAGE - PLEASE LOOK AT PCB 1.2 FOR MISSING INFORMATION</b> | <b>NOTE: WE ARE CURRENTLY WORKING ON THIS PAGE - PLEASE LOOK AT PCB 1.2 FOR MISSING INFORMATION</b> | ||
Version vom 5. Juli 2017, 11:38 Uhr
This page describes how to assemble PCB 1.3, how to add modules and how to configure the PCB.
[Pcb1_3.jpg]
NOTE: WE ARE CURRENTLY WORKING ON THIS PAGE - PLEASE LOOK AT PCB 1.2 FOR MISSING INFORMATION
Schematics, Drawings
Videos
- Aufbau Main Teil 1 (Jumper, Kondensatoren (bei Versorgung), INA, Jumper Versorgungsleisten, Bargraph, Bluetooth, Jumper I2C-Bus)
- Aufbau Main Teil 2 (Motortreiber)
- Aufbau Main Teil 3 (Arduino, Protection, MOSFET, Sicherungshalter, Relais)
- Aufbau Main Teil 4 (Rückseite: Odo-Teiler, Versorgungsklemmen, Buzzer, Widerstände, Kondensatoren)
Forum
http://www.ardumower.de/index.php/de/forum/ardumower-pcb/1348-building-instruction-for-the-1-3-board
