AzuritBer Pi Firmware (English)

Aus www.wiki.ardumower.de
Version vom 5. November 2020, 19:15 Uhr von Bernard (Diskussion | Beiträge) (→‎Build the SD Card)

Wechseln zu: Navigation, Suche

Level 2 Raspberry Pi

A Raspberry Pi is connected over Due Native USB to the arduino

What you need

1 Raspberry PI 3B+ or PI4 (The Pizero W can work but very slowly and it's not the goal).Pi3 board.jpg

1 DC/DC voltage regulator to power the PI.Minumum 5A version from marotronicsDC DC 5A.jpg https://www.marotronics.de/5A-DC-DC-step-down-module-XL4015-with-heat-sink-eg-for-Arduino

1 USB mouse,keyboard for setting.You can simply use a standard one for the setting and disconnect it after But it's also possible to use a small one like that to drive the mower remotely in manual mode.Small keyboard1.jpg

1 SD Card 32 GB class 10Sd card.jpg

1 PowerBank or DC/DC voltage regulator connected to PCB1.3 or power supply for the raspberry pi minimum 3A

1 HDMI cable to see the PI desktop on your TV or HDMI Screen.

1 TV or monitor with HDMI input to easily see the raspberry IP adress on the first boot.

Build the SD Card

You need to first write the raspbian OS on the SD Card .

It's easy using the main raspberry.org site.

Connect to : https://www.raspberrypi.org/


Buster001.png and select the Download page


Buster002.png

Buster003.png


Buster004.png

Buster005.png

Buster006.png

Von „https://wiki.ardumower.de/index.php?title=AzuritBer_Pi_Firmware_(English)&oldid=8533“