3D-printed extensions and replacements (English): Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
(→Mowing motor protection ring) |
(→Mowing motor protection ring) |
||
| Zeile 13: | Zeile 13: | ||
=Mowing motor protection ring= | =Mowing motor protection ring= | ||
| − | The protection ring is mounted at the chassis bottom to get rid of gras on the motor shaft, reduce dust etc. | + | The protection ring is mounted at the chassis bottom (v1) or at the motor bottom (v2) to get rid of gras on the motor shaft, reduce dust etc. |
Version vom 6. September 2021, 15:49 Uhr
This page collects some Ardumower-specific extensions and replacements that can be created by using a 3D-printer.
Inhaltsverzeichnis
PCB holder
Mowing motor holder and height adjustment
Mowing motor protection ring
The protection ring is mounted at the chassis bottom (v1) or at the motor bottom (v2) to get rid of gras on the motor shaft, reduce dust etc.
Profile 4040, 120 mm
This is a standard 4040 profile with a length of 120 mm. It can be used to replace the standard metal profile which might possibly improve EMC-characteristics for the inductive perimeter sensor.
Sheep Sheep spikes for wheels
