3D-printed extensions and replacements (English): Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
(→Universal tire adapter) |
(→Universal tire adapter) |
||
Zeile 30: | Zeile 30: | ||
=Universal tire adapter= | =Universal tire adapter= | ||
− | For even higher traction, one can use [https://www.marotronics.de/Air-wheel-260-mm-eg-for-Ardumower-handcart-wheel-hand-cart-wheel-wheelbarrow-wheel pushcart tires from the shop]. Using a 3d printed adapter one can mount them onto the Ardumower clamping element. | + | For even higher traction, one can use [https://www.marotronics.de/Air-wheel-260-mm-eg-for-Ardumower-handcart-wheel-hand-cart-wheel-wheelbarrow-wheel pushcart tires from the shop]. Using a 3d printed adapter one can mount them onto the Ardumower clamping element. '''This is an universal tire adapter version, everything can be adjusted (requires OpenSCAD). ''' |
[[File:universal_tire_adapter.png|400px]] | [[File:universal_tire_adapter.png|400px]] |
Version vom 25. September 2021, 18:02 Uhr
This page collects some Ardumower-specific extensions and replacements that can be created by using a 3D-printer.
Inhaltsverzeichnis
PCB holder
Mowing motor holder and height adjustment
Mowing motor protection ring
The protection ring is mounted at the chassis bottom (v1) or at the motor bottom (v2) to get rid of gras on the motor shaft, reduce dust etc.
Universal tire adapter
For even higher traction, one can use pushcart tires from the shop. Using a 3d printed adapter one can mount them onto the Ardumower clamping element. This is an universal tire adapter version, everything can be adjusted (requires OpenSCAD).
Profile 4040, 120 mm
This is a standard 4040 profile with a length of 120 mm. It can be used to replace the standard metal profile which might possibly improve EMC-characteristics for the inductive perimeter sensor.
Sheep Sheep spikes for wheels