3D-printed extensions and replacements (English): Unterschied zwischen den Versionen
(→Universal tire adapter) |
(→Mowing motor holder and height adjustment) |
||
Zeile 15: | Zeile 15: | ||
<b>[https://drive.google.com/open?id=1D3ll0NGIkWKfTwupYru1E83z4CcuYP2o Download]</b> | <b>[https://drive.google.com/open?id=1D3ll0NGIkWKfTwupYru1E83z4CcuYP2o Download]</b> | ||
+ | |||
+ | =Ardumower front panel with IMU holder= | ||
+ | https://forum.ardumower.de/threads/neue-frontpartie-f%C3%BCr-standard-chassis.24165/ | ||
=Mowing motor protection ring= | =Mowing motor protection ring= |
Version vom 28. September 2021, 19:24 Uhr
This page collects some Ardumower-specific extensions and replacements that can be created by using a 3D-printer.
Inhaltsverzeichnis
PCB holder
IMU holder
Mowing motor holder and height adjustment
Ardumower front panel with IMU holder
https://forum.ardumower.de/threads/neue-frontpartie-f%C3%BCr-standard-chassis.24165/
Mowing motor protection ring
The protection ring is mounted at the chassis bottom (v1) or at the motor bottom (v2) to get rid of gras on the motor shaft, reduce dust etc.
Universal tire adapter
For even higher traction, one can use pushcart tires from the shop. Using a 3d printed adapter one can mount them onto the Ardumower clamping element. This is an universal tire adapter version, everything can be adjusted (requires OpenSCAD).
1. Download universal tire adapter for OpenSCAD
2. pushcart tires adapter (STL)
Profile 4040, 120 mm
This is a standard 4040 profile with a length of 120 mm. It can be used to replace the standard metal profile which might possibly improve EMC-characteristics for the inductive perimeter sensor.
Sheep Sheep spikes for wheels