3D-printed extensions and replacements (English)

Aus www.wiki.ardumower.de
Wechseln zu: Navigation, Suche

This page collects some Ardumower-specific extensions and replacements that can be created by using a 3D-printer.

PCB holder

Pcb holder.jpeg

Download

IMU holder

400px

https://forum.ardumower.de/threads/halterung-f%C3%BCr-mpu-6050-imu-an-der-hauptplatine.24459/#post-49752

Mowing motor holder and height adjustment

Mowing height.jpg

Download

Mowing motor protection ring

The protection ring is mounted at the chassis bottom (v1) or at the motor bottom (v2) to get rid of gras on the motor shaft, reduce dust etc.


Motor cover.png

Motor protection ring.jpg

Motor protection ring with blade.jpg


Download v1

Download v2

Universal tire adapter

For even higher traction, one can use pushcart tires from the shop. Using a 3d printed adapter one can mount them onto the Ardumower clamping element. This is an universal tire adapter version, everything can be adjusted (requires OpenSCAD).

Universal tire adapter.png Rad adapter2.JPG

Download universal tire adapter for OpenSCAD

pushcart tires adapter (STL)

Profile 4040, 120 mm

This is a standard 4040 profile with a length of 120 mm. It can be used to replace the standard metal profile which might possibly improve EMC-characteristics for the inductive perimeter sensor.

Profile 4040, 30 mm-version for illustration

Download from Thingiverse

Sheep Sheep spikes for wheels

Download from Github


Perimeter sensor case