3D-printed extensions and replacements (English): Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
Gimate (Diskussion | Beiträge) |
|||
Zeile 1: | Zeile 1: | ||
This page collects some Ardumower-specific extensions and replacements that can be created by using a 3D-printer. | This page collects some Ardumower-specific extensions and replacements that can be created by using a 3D-printer. | ||
+ | |||
+ | =Mowing motor holder and height adjustment= | ||
+ | [[File:Mowing_height.jpg|600px]] | ||
+ | |||
+ | <b>[https://forum.ardumower.de/data/media/kunena/attachments/1259/Frsmotorbefestigung2.4neuVersionin3D_2019-08-20-2.zip0 Download]</b> | ||
=Profile 4040, 120 mm= | =Profile 4040, 120 mm= |
Version vom 27. April 2020, 20:35 Uhr
This page collects some Ardumower-specific extensions and replacements that can be created by using a 3D-printer.
Mowing motor holder and height adjustment
Profile 4040, 120 mm
This is a standard 4040 profile with a length of 120 mm. It can be used to replace the standard metal profile which might possibly improve EMC-characteristics for the inductive perimeter sensor.