Ardumower software design

This page describes some internals of the Ardumower software architecture.

Finite state machine

Main component of the software is a so called 'finite state machine', that means there exists a set of states ("OFF", "FORWARD", "ROLL", etc.) that the robot can be in. Depending on events (sensor is triggering etc.), the robot will enter a new state.

State diagram (Note: The drawing has been created using draw.io)

Implemented updates:

• If obstacle during reverse => roll
• If obstacle during roll => forward

C++ classes/interfaces

Revision : ardumower-1.0a4-Azurit

(Courtesy of Jacques found in the Forum)

•