Bluetooth
Aus www.wiki.ardumower.de
Version vom 11. September 2014, 21:30 Uhr von 93.219.27.134 (Diskussion) (Die Seite wurde neu angelegt: „ == '''Bluetooth HC-05 ''' == The Bluetooth Module will run at 3.3V, you need a voltage divider for RX line and an Pullup Resistor for the TX Line, like sh…“)
Bluetooth HC-05
The Bluetooth Module will run at 3.3V, you need a voltage divider for RX line and an Pullup Resistor for the TX Line, like showing in Circuit.
For Programming the Module, you must connect the Key Pin from the BT Module, to the 3,3 V from the Arduino and disconect after.
For Programming use the Serial Console from Arduino and Press "d"
