Version vom 28. April 2021, 23:23 Uhr

This page is under construction.

This page describes the assembly of the Ardumower chassis that you can purchase via the shop .

Please start watching the detailed instruction videos on Youtube (see section "Videos"). This page is based on the content of the videos.

Ardumower Chassis 2021 specifications

Videos

1. Ardumower Tutorials Chassis 2021 Teil 1 WasGehoertDazu
2. Ardumower Tutorials Chassis 2021 Teil 2 Vorbereitung
3. Ardumower Tutorials Chassis 2021 Teil 3 Montage

Whats inside the Box?

• 

  Plates etc.

• 

  Electronics, Screws

Preparation of Plate-Materials

• 

  parts with sharp burrs

• 

  parts without sharp burrs

• 

  glue the doubled Motor-mounting-plates

Front-Plate

Mount the three Sonar-Sensors with hot-glue (carefully).

Mow-Plate

Inserting the threaded sleeves for the mower blades.

• 

  1

• 

  2

• 

  3

Wiring

There are two options to wire the emergency switch.

Tools

Required Tools

• Screw driver
• Different Imbus screw driver
• Different Torx screw driver
• Knife

Optional Tools

• Round and flat file
• Electric padsaw
• Drill machine with drill set (3,4,6,8,10 mm drills)

Optional Material

• M4 washer and spring washer
• 1 M8 carriage bolt
• Rain sensor case 3D print from model
• Case for NTRIP receiver module for GSPS variant of the Ardumower

Case assembly

• 

  Arrange parts and drill two holes for bumper cabling (see right hand finger for one of the marks)

• 

  Mount profiles to baseplate and gear-motors to side walls (with especially marked screws "Motor")

• 

  Mount profile for mowing motor

• 

  Install sealing ring

• 

  install mowing motor

• 

  mount sidewalls

• 

  prepare backside

• 

  install backside

• 

  prepare bumper

• 

  start with screws -> washers -> plastic spacer sleeves

• 

  add bumper -> washers -> nuts

• 

  finished bumper

• 

  install mowing plate

• 

  install frontplate

• 

  finished case

• 

  install electronics

• 

  final frontplate

• 

  final backplate

• 

  final top view

Further links

instructions on ardumower forum