Chassis 2021: Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
BenPan (Diskussion | Beiträge) (→Mow-Plate) |
BenPan (Diskussion | Beiträge) (→Wiring) |
||
Zeile 51: | Zeile 51: | ||
=Wiring= | =Wiring= | ||
− | There are two options to wire the emergency switch. | + | There are two options to wire the emergency switch. Option 2 is the recommended version. If you realize version 1, don´t forget an external accessible power-Switch (close to "connector") . |
[[File:Chassis2021EmergencyStop.png | 500px]] | [[File:Chassis2021EmergencyStop.png | 500px]] | ||
− | |||
=Tools= | =Tools= |
Version vom 28. April 2021, 23:25 Uhr
This page is under construction.
This page describes the assembly of the Ardumower chassis that you can purchase via the shop .
Please start watching the detailed instruction videos on Youtube (see section "Videos"). This page is based on the content of the videos.
Inhaltsverzeichnis
Ardumower Chassis 2021 specifications
Videos
- Ardumower Tutorials Chassis 2021 Teil 1 WasGehoertDazu
- Ardumower Tutorials Chassis 2021 Teil 2 Vorbereitung
- Ardumower Tutorials Chassis 2021 Teil 3 Montage
Whats inside the Box?
Preparation of Plate-Materials
Front-Plate
Mount the three Sonar-Sensors with hot-glue (carefully).
Mow-Plate
Inserting the threaded sleeves for the mower blades.
Wiring
There are two options to wire the emergency switch. Option 2 is the recommended version. If you realize version 1, don´t forget an external accessible power-Switch (close to "connector") .
Tools
Required Tools
- Screw driver
- Different Imbus screw driver
- Different Torx screw driver
- Knife
Optional Tools
- Round and flat file
- Electric padsaw
- Drill machine with drill set (3,4,6,8,10 mm drills)
Optional Material
- M4 washer and spring washer
- 1 M8 carriage bolt
- Rain sensor case 3D print from model
- Case for NTRIP receiver module for GSPS variant of the Ardumower