Getting started

Aus www.wiki.ardumower.de
Wechseln zu: Navigation, Suche

Steps

Here are the overall steps for building your DIY Ardumower:

  1. Assemble the chassis (motors, mower slice, blades etc.)
  2. Assemble the PCB
  3. Connect motors, battery
  4. Flash the Arduino
  5. Using Arduino serial console:
    1. Ensure motors are connected correctly
    2. Configure Bluetooth module
  6. Using Android pfodApp:
    1. Calibrate battery, motors etc.
    2. Calibrate IMU
Von „https://wiki.ardumower.de/index.php?title=Getting_started&oldid=527“