Ardumower Chassis 'mountain mod': Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
(→Abstract) |
(→Abstract) |
||
Zeile 5: | Zeile 5: | ||
<gallery> | <gallery> | ||
− | File: Ardumower_slope.png | + | File: Ardumower_slope.png difference front/rear wheel |
</gallery> | </gallery> | ||
Version vom 6. Februar 2015, 00:39 Uhr
Inhaltsverzeichnis
Abstract
This page describes how to modify the Ardumower Chassis to run up higher slopes with it (tested up to 45 percent). This works by
- turning the front drive into a rear drive and so requires to reverse the drive direction (so front is back and back is front)
- modifying the tire profile (give it more grip)
- Ardumower slope.png difference front/rear wheel
Needed parts
- cup
- acrylic glas sheet
- rubber band
Turning front drive into rear drive
- swap motor cables (right and left)
- swap odometry cables (right and left)
- swap battery charging pin cables (right and left)
- disable ultrasonic sensor
- move perimeter coil from old front to old back side