Ardumower Chassis 'mountain mod'
Aus www.wiki.ardumower.de
Inhaltsverzeichnis
Abstract
This page describes how to modify the Ardumower Chassis to run up higher slopes with it (tested up to 30 percent). This works by
- turning the front drive into a rear drive and so requires to reverse the drive direction (so front is back and back is front)
- modifying the tire profile (give it more grip)
- Modify tire profile OR
- Off-road version (sand etc.): A bicycle tube or U-form rubber is added around the tire
Needed parts
- cup
- acrylic glas sheet (1mm)
- rubber band
Turning front drive into rear drive
- swap motor cables (right and left)
- swap odometry cables (right and left)
- swap battery charging pin cables (right and left)
- disable ultrasonic sensor
- move perimeter coil from old front to old back side
New rubber tires
pushcart tires adapter
version 1 (OpenSCAD): https://drive.google.com/open?id=1b2QyTGZAHqlq3FxoZMuL9yAjkAN27W_W
version 2 (STL): https://drive.google.com/open?id=1Z5-RnOGF6VBqRKgV-_IFwwNccazjhj48
https://forum.ardumower.de/threads/traktion.22179
https://forum.ardumower.de/threads/3d-teile-und-zubeh%C3%B6r-f%C3%BCr-den-ardumower.22588/
Pictures
Videos
- pushcart tires
- Demo
- Optimized tires
- Bicycle tube tires for 'off-road'
- Ardumower rear/front driven climbing difference