Ardumower chassis: Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
(→Chassis data) |
(→Wheels) |
||
Zeile 55: | Zeile 55: | ||
File:Chassis_spanner_schrauben_lösen2.jpg |Loose spanner screws | File:Chassis_spanner_schrauben_lösen2.jpg |Loose spanner screws | ||
File:Chassis_rad_festziehen.jpg| Tighten wheel | File:Chassis_rad_festziehen.jpg| Tighten wheel | ||
− | File:Chassis_spanner_lösen2.jpg| How to loose spanner | + | File:Chassis_spanner_lösen2.jpg| How to loose spanner again |
</gallery> | </gallery> | ||
− | |||
==Mower motor== | ==Mower motor== |
Version vom 13. September 2014, 20:10 Uhr
This page describes the assembly of the Ardumower chassis that you can purchase via the shop .
Inhaltsverzeichnis
Chassis data
- Dimension (L/B/H): 60x36x25cm
- Weigth: approx 10 kg with motors and battery
- Mowing motor: 24V DC, 3150 rpm
- Mowing slice: 190mm diameter, 3 blades
- Wheels: 250mm diameter
- Gear motors: 2 x DC 24V planetary drive
- Battery: Lithium-Ion 24V
Videos
- Chassis assembling
- Chassis assemling (slow)
- Overall impression
- Loundness test
- Gear motor test
- Gear motor hardness test
- Mowing motor hardness test
- Perimeter test
- Obstacle detection via motor current
- Obstacles detection via ultrasonic
- Robot releases itself
- Robot releasing long-time test
- Plastic blades test
- Docking test
- 120m perimeter wire test
- Rain sensor test
- 3D simulation
What you need
- Screw driver
- Imbus screw driver
Case assembly
...