Getting started: Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
| Zeile 15: | Zeile 15: | ||
#[[Ardumower PCB| Assemble the PCB]] | #[[Ardumower PCB| Assemble the PCB]] | ||
#[[Motor driver| Connect motors, battery]] | #[[Motor driver| Connect motors, battery]] | ||
| − | #[[Ardumower PCB| Download software and flash the Arduino]] | + | #[[Ardumower PCB| Download software and flash the Arduino]] <b>NOTE</b>: If you have never worked with Arduino before, read our <b>[http://wiki.ardumower.de/index.php?title=Arduino_first_steps 'Arduino first steps' introduction]</b>. |
#Using Arduino serial console: | #Using Arduino serial console: | ||
##[[Ardumower PCB| Ensure motors are connected correctly]] | ##[[Ardumower PCB| Ensure motors are connected correctly]] | ||
Version vom 24. November 2014, 13:09 Uhr
Build
Download
Run!
Steps (overview)
Here are the overall steps for building your DIY Ardumower:
- Assemble the chassis (motors, mower slice, blades etc.)
- Assemble the PCB
- Connect motors, battery
- Download software and flash the Arduino NOTE: If you have never worked with Arduino before, read our 'Arduino first steps' introduction.
- Using Arduino serial console:
- Using Android pfodApp:
