Ardumower chassis: Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
(→Ardumower 1.0 Chassis specifications) |
(→Case assembly) |
||
Zeile 51: | Zeile 51: | ||
<gallery> | <gallery> | ||
+ | File: Ardumower_chassis_box.jpg | Chassis box | ||
+ | File: Ardumower_chassis_inside_ready.jpg | Chassis box with motors | ||
File: Underrun_protection.jpg | Underrun protection | File: Underrun_protection.jpg | Underrun protection | ||
File: Underrun_protection_holes.jpg | Bumper | File: Underrun_protection_holes.jpg | Bumper |
Version vom 30. Mai 2016, 01:32 Uhr
This page describes the assembly of the Ardumower chassis that you can purchase via the shop .
Inhaltsverzeichnis
Ardumower 1.0 Chassis specifications
- Dimension (L/B/H): 60x36x25cm
- Total weight: approx 9 kg (including all components - motors, battery, PCB etc.)
- Adjustable mower motor height
- Mowing motor: 24V DC, 3150 rpm
- Mowing disc: 190mm diameter, 3 blades
- Wheels: 250mm diameter
- Gear motors: 2 x DC 24V planetary drive, 33 rpm, with integrated encoders
- Battery: Lithium-Ion 29.4V
Videos
- Building an Ardumower: chassis, motors, tires assembling
- Building an Ardumower: chassis, motors, tires assembling (slow)
- Overall impression
- Loundness test
- Gear motor test
- Gear motor hardness test
- Mowing motor hardness test
- Perimeter wire test (indoor)
- Perimeter wire test (120m outdoor)
- Obstacle detection via motor current
- Obstacles detection via ultrasonic
- Robot releases itself
- Robot releasing long-time test
- Plastic blades test
- Docking test (very initial prototype)
- Rain sensor test
- 3D simulation
What you need
- Screw driver
- Imbus screw driver
Case assembly
... Your help is needed to fill in photos here ...