Ardumower chassis: Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
(→Chassis specifications) |
(→Chassis specifications) |
||
Zeile 6: | Zeile 6: | ||
<gallery> | <gallery> | ||
File: Ardumower-chassis.jpg | Chassis | File: Ardumower-chassis.jpg | Chassis | ||
− | |||
File: Ardumower_chassis_exploded.jpg | Chassis exploded | File: Ardumower_chassis_exploded.jpg | Chassis exploded | ||
File: Ardumower_chassis_side.jpg | Chassis side | File: Ardumower_chassis_side.jpg | Chassis side | ||
+ | File: Ardumower_chassis_inside.jpg | Chassis inside | ||
File: Ardumower_chassis_inside3.jpg | Chassis and electronics inside | File: Ardumower_chassis_inside3.jpg | Chassis and electronics inside | ||
</gallery> | </gallery> |
Version vom 13. Oktober 2014, 12:31 Uhr
This page describes the assembly of the Ardumower chassis that you can purchase via the shop .
Inhaltsverzeichnis
Chassis specifications
- Dimension (L/B/H): 60x36x25cm
- Weight: approx 10 kg with motors and battery
- Mowing motor: 24V DC, 3150 rpm
- Mowing slice: 190mm diameter, 3 blades
- Wheels: 250mm diameter
- Gear motors: 2 x DC 24V planetary drive
- Battery: Lithium-Ion 24V
- Max. slope: 20 degree
Videos
- Chassis assembling
- Chassis assemling (slow)
- Overall impression
- Loundness test
- Gear motor test
- Gear motor hardness test
- Mowing motor hardness test
- Perimeter test
- Obstacle detection via motor current
- Obstacles detection via ultrasonic
- Robot releases itself
- Robot releasing long-time test
- Plastic blades test
- Docking test
- 120m perimeter wire test
- Rain sensor test
- 3D simulation
What you need
- Screw driver
- Imbus screw driver
Case assembly
...